Pallet has made it easier to create so many things by staying within the budget. It is a handy material which comes in so many variations and qualities. A little creativity can change into useful pieces of home environment. The pallet can be easily transformed into amazing bed frame. The materials needed require pallet, nails, hammer etc.
Initially the front and the back are joined with the help of pocket hole screws. Later, after the front and back are well done, fit in the sides to the front and back sections again with the help of pocket hole screws. The boards are correctly positioned with the help of clamps .
Attach the corner supports first at the front corner and then at the opposite corner, at the bottom of each 2×6, first in the front corner, to help create square shape for the bed frame.
Attach the side supports such that the top of the board is 2″ away from the top. Secure the board will be secured further with the help of wood glue.
In the middle of the board attach the center support leg to the center support with some pocket hold screws. This is to be followed for a King size bed. For a common twin bed the support leg is not a must.
In the middle of the front and back boards, attach the center support, in order to line up the bottom of the support with the bottom of the 2×6.
Put the first support slat at the top and then following this flush with the top 2×6. Then attach every slat at a space or distance 4″ from the previous one. To end up the task place the last slat against the bottom 2×6.
So here you go. The frame is absolutely ready. To check the durability of the frame you need to put it in your bed, place a comfortable mattress and sleep tight.